Home Forums Tutorials, Tips, Tricks and Techniques Cards, Cards…it's all about CARDS! Card tutorial using the January – Bejeweled kit.

This topic contains 7 replies, has 0 voices, and was last updated by  odiammy 2 years, 11 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #7306

    odiammy
    Member
      Newbie
      Send PM
      Hello everyone,
      I would like to share my latest card with you, using the January kit.
      One of our members asked me to do a turorial on the card I showed you earlier,
      so I thought, why not make another one? And to be honest, I like this one even better.
      I hope you do too!

      card_zpshtezbrye.jpg

      This card opens like a normal card, but it also has a flip up element. The front panel can be lift up and undeeath there's a pocket with a tag. Of course you can add whatever into that pocket, but for this tutorial I chose to do a little tag.

      The lightning in the photo's are a bit unregular, cause I shoot pictures at night as well as during the day so, I apologize for that. Grab yourself a cup of coffee, cause this tutorial is photo heavy!!! Okay let's get to it!

      0m_zps4vnejde3.jpg
      I started out with cutting a base card at 4.1/16 x 6.1/16 My fold is on the left.

      1m_zpspytiq7qd.jpg
      My fisrt layer was cut at 4.3/4 x 6.1/8 slightly bigger than my base card.

      2m_zpsx0zklfvx.jpg
      I distressed and inked the edges, and then glued it to my base card.

      3m_zpsfkarbaph.jpg
      Then I cut this next piece of PP down to 4.3/8 x 3

      4m_zpsif8atur4.jpg
      I distressed and inked all the edges and glued the paper like a pocket at the bottom of my card. I used a circle punch, to punch out a half circle, which makes it easier to slide a tag in and out.

      5m_zpsagmkkxxt.jpg
      Next I cut this piece of PP at 4.3/8 x 5.3/8 This is going to be my top-background. (I hope this makes sense)

      6m_zpsyq6afkth.jpg
      I flipped it over and made a scoreline at 3/8 of an inch at the top. **** I decieded later on that it needed to be 5/8 from the top***

      7m_zpstwznerhk.jpg
      Then I took a pencil, placed it just above (or below, it depends how you look at it) the scoreline and started rolling the paper around the pencil. Not all the way down, just a little, till you get a nice round fold. It will give you lots of dimension.

      8m_zpsa4og1imr.jpg
      The red-marked strip will be glued to the card later on.

      9mo_zpsbylnwkgm.jpg
      I distressed and inked the edges and at the top, I cut the glue-strip in and angle on both sides.

      10m_zpsgfnepjxk.jpg
      Then I took 3 pearls,

      11m_zpswe7s5ysk.jpg
      and glued them to the bottom like this. The white dots of glue is where they are going to be placed. I used Beacon Gem-Tac for glueing the pearls.

      12m_zps0eychjrq.jpg
      Then I took this die-cut cardboard that I have, (but you can use lace for this part too, or cut a piece of cardboard scallops-wise) and cut off a little piece. Wide enough to fit my card.

      13m_zpsisyiux94.jpg
      I glued it right under the pearls.

      14m_zpsm9tlncvg.jpg
      Flipped it over, cut off the excess and inked the edges.

      15m_zps9dptnhps.jpg
      I cut a piece of the lace that came in the kit, and glued it at the top of my card like this.

      16m_zpsizqrwvfd.jpg
      As I said earlier I made a new scoreline at 5/8 from the top (for better hold) and glued that part, just a tiny bit, overlapping the lace.

      17mo_zpsb8i0tokg.jpg
      This is how it looks now. The pearls that are glued to the backside of the top layer, holds it perfectly balanced.

      18m_zpsgurjxv5t.jpg
      I fussy cut this bird and inked the edges with Gathered Twigs distress ink.

      19m_zpsrwofqfs3.jpg
      From the box my kit came in, I cut 2 thin strips. Then I split the strips to create some twigs.

      20m_zpsoeibwncm.jpg
      And glued them like this.

      21m_zpsjfoppotc.jpg
      I used foam adhesive to the back of the bird, added some extra glue, just to make sure

      22m_zpsdqtjpfmc.jpg
      And glued him in place.

      23m_zpsvb7hcgjo.jpg
      I fussy cut some flowers and inked the edges. I also used one from the flower package that came in the Main Kit.

      24m_zpstepjg71i.jpg
      I tore a few pieces of netting

      25m_zpstqra6xsg.jpg
      And glued them in different spots on my card, using Beacon's Fabri-Tac.
      26m_zps1cveav2f.jpg

      27m_zpsgldj43ax.jpg
      I foam-dotted my flowers and glued them in place.

      28m_zpselk70ex0.jpg
      For stamping my sentiment on the front, I need something to, lay under my dimensional front layer. So, I used the lid of a distress inkpad. It was perfect to give me a stable base, for my stamping.

      29m_zpslddiaqhg.jpg
      I used Archival ink, in Jet Black, to stamp my sentiment.

      30m_zpst6nihssf.jpg
      As you look very closely, just above the word Thinking, you can see the white embossing powder…..I wanted to, somewhat, frame my sentiment and I used the stamps that came in the Main Kit.

      31m_zpscwjvsqrl.jpg
      The frame didn't came out perfectly straight, but I was okay with it.

      32m_zpsi381ezni.jpg
      I found that my bird was a little to plain so I added some Rock Candy Distress Stickles to his belly.

      33m_zpsbwnssqbv.jpg
      And also to my leaves.

      34m_zpsxn2lsjhq.jpg
      Using the Cinnamon Stickles that came in the Main Kit, I stickled up the twigs that I cut earlier.

      35m_zps90gj1jkt.jpg
      I placed some liquid pearls at the left top of my card

      36m_zpsdmeugqhn.jpg
      And in a different color, some at the bottom of my card. Set it aside to dry.

      37m_zpskbeuparm.jpg
      For the tag that is going inside the pocket, I cut a piece of PP at 2.3/4 x 4.3/8 I rounded the coers and made 2 marks at the top, where I want my holes to be.

      38mo_zps4kmleeaz.jpg
      I distressed and inked the edges of my tag, made the holes using a crop-a-dile, and using the cord and a Prima velvety dangling, which both came in the Main Kit, I dressed up my tag.

      39m_zpsnogj9vlv.jpg
      I placed the tag in the pocket like so

      card_zpshtezbrye.jpg
      and called my card done!
      Here are some close up's:

      card1_zpstv8hx8de.jpg

      card2_zpsjvlruajm.jpg

      card3_zpshyjadeqy.jpg

      card4_zpsomhihsgf.jpg

      card5_zpsfrrynn7f.jpg

      card6_zpsaxp7kry8.jpg

      I hope you like it and give it a try! If you do, please share your card here in this thread and of course our Facebook Gallery.

      #253041
      Krissy
      Krissy
      Swirly Admin
        Send PM

        Oh my gosh… LOVE IT Paulien! The bird and flowers are so pretty & LOVE the idea for the twigs. Gorgeous!

        #253042

        odiammy
        Member
          Newbie
          Send PM

          Gorgeous card, Paulien! Soooooo much dimension and texture! Love it!

          #253043

          craftysprinkles
          Swirly Scrapper
            Newbie
            Send PM

            I just LOVE this design, Paulien!!! Great dimension and fussy cutting and what a great idea about the twigs!
            It just went on my moost do list!!!!
            Thanks for such a wonderful tutorial!

            #253044
            Krissy
            Krissy
            Swirly Admin
              Send PM

              Beautiful card Paulien, love how you did the twigs!

              #253045
              Krissy
              Krissy
              Swirly Admin
                Send PM

                Wow!! So pretty!

                "Some cars look like they're going fast when they're standing still. The Camaro looks like it's going to beat you unconscious, put you in a silly hat, invite a couple of other Camaros over to take photos of you, then e-mail them to all your friends and co-workers. Call me crazy, but I like that in a car."

                #253046
                Krissy
                Krissy
                Swirly Admin
                  Send PM

                  Awesome card Paulien, love how you did the twig.

                  "Some cars look like they're going fast when they're standing still. The Camaro looks like it's going to beat you unconscious, put you in a silly hat, invite a couple of other Camaros over to take photos of you, then e-mail them to all your friends and co-workers. Call me crazy, but I like that in a car."

                  #253047

                  Snagg1
                  Member
                    Newbie
                    Send PM

                    Beautiful as always Paulien 🙂 Thank you !heart

                    #253048

                    odiammy
                    Member
                      Newbie
                      Send PM

                      Paulien, I love and appreciate your tutorials. Thank you!

                    Viewing 9 posts - 1 through 9 (of 9 total)

                    You must be logged in to reply to this topic.