Home Forums Tutorials, Tips, Tricks and Techniques Flower Tutorials Distressed Calla Lily tutorial

This topic contains 8 replies, has 0 voices, and was last updated by  craftysprinkles 6 years, 9 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #1825

    Snagg1
    Member
      Send PM

      I fell in love with this flower when I saw a video for it on the Heartfelt Creations website. So, if you don't want to read my tutorial you can go to over to Heartfelt Creations and watch it over at HC.

      I did distress this up a little bit, which is not on the video. All right! Let's get started……

      [img:width=107&height=160]/wp-content/uploads/2014/1292184108_13_FT0_th_callalily.jpg[/img]

      #77547

      Snagg1
      Member
        Send PM

        Here are the supplies you will need:

        * Lily Petals Pre Cut Stamps – You will use the largest stamp (Heartfelt Creations)
        * Perfect Petals Die Set by Spellbinders – You will use the largest die (Heartfelt Creations)
        * Cuttlebug (not pictured)
        * Glitter (not shown) and Glitter Tray
        * Paper Distresser
        * Ink (I used two: Bundled Sage Distress Ink, and Coffee Bean Archival Ink)
        * Jolee's Boutique Vintage Flower & Bud Stickers (can be bought in various places)
        * Floral Tape
        * Paint brush, pen, or stylus – something to curl your flower
        * Glue (I used Zots)

        [img:width=146&height=160]/wp-content/uploads/2014/1292184147_13_FT57197_th_callalilysupplies.jpg[/img]

        #77548

        Snagg1
        Member
          Send PM

          Step 1

          I wanted the inside of my lily to have more of a variegated look. I first covered my stamp in Bundled Sage and then strategically hit specific areas with the Coffee Bean. **Tip – always start with the light color when using more than one ink. This way you won't muddy up the light ink pad. I had to use a paper towel to lightly blot of some of the brown ink, otherwise it would have been really dark. I was going for a more washed out look so I didn't want super dark ink.

          [img:width=160&height=143]/wp-content/uploads/2014/1292184193_13_FT57197_th_callastep1.jpg[/img]

          #77549

          Snagg1
          Member
            Send PM

            Step 2

            Cut out the stamp using your Spellbinders die. Now cut off the bottom 1/2 inch of the flower.

            [img:width=160&height=107]/wp-content/uploads/2014/1292184229_13_FT57197_th_callastep2.jpg[/img]

            #77550

            Snagg1
            Member
              Send PM

              Step 3

              Distress the edges of the petal and crinkle up the petal giving it a wo look. Take Bundled Sage and hit the edges and some of the wrinkles. Remember to do the back because when you curl your lily it will show. Add some water (for such a small piece you can use a paint brush, Q-Tip, or your fingers) around the edge of your petal. Remember that you used Distress Ink so try not to get the center of your flower wet or you will loose some of the detail from the stamp. Now start to work your paper to give some curl to the edges and waves to your flower. While the paper is still damp, place your petal vertically (like above) and place your paint brush (also vertically) and roll the bottom of the flower around your brush until the bottom looks like a lily. You are rolling it from side to side and not top to bottom.

              I don't have pictures of the last step, but you can refer to the sample picture at the top. Now stake a flower stamen and using glue place the stamen inside the lily. You can thread the stamen through the bottom of the flower. You may also need to glue the bottom edge of your lily where you curled it around. I cut down a wooden skewer for the stem and wrapped the stamen around it. You can use floral wire or whatever you like for the stem of your flowers. The last thing you need to do is wrap floral tape around everything to secure it in place. I decided to use some Rock Candy Stickles on the inside to give it some shimmer and I also rolled the edge in some silver glitter to match the other flowers on my page. Not something you need to do, but this just gives you an idea of how you can customize it to coordinate with other flowers you may be using.

              [img:width=160&height=141]/wp-content/uploads/2014/1292184276_13_FT57197_th_callastep3.jpg[/img]

              #77551
              Krissy
              Krissy
              Swirly Admin
                Send PM

                those are gorgeous flowers..great tutorial..tyty 🙂

                #77552

                Thanks for sharing the tutorial, Lisa! Beautiful!

                #77553
                Krissy
                Krissy
                Swirly Admin
                  Send PM

                  So cute! They look really easy to make by hand if your don't have the die.

                  "Some cars look like they're going fast when they're standing still. The Camaro looks like it's going to beat you unconscious, put you in a silly hat, invite a couple of other Camaros over to take photos of you, then e-mail them to all your friends and co-workers. Call me crazy, but I like that in a car."

                  #77554

                  Snagg1
                  Member
                    Send PM

                    Absolutely! As long as you have the basic shape you are good to go ;)

                    #77555

                    craftysprinkles
                    Swirly Scrapper
                      Send PM

                      Thanks, Lisa!!!!

                    Viewing 10 posts - 1 through 10 (of 10 total)

                    You must be logged in to reply to this topic.